Catalytic nanobubble system for treatment of effluents in tanneries

Authors

  • Francisco Aguirre Guzman Nor Piel S.R.L., Trujillo, Perú
  • Amilcar Santos Diego Perez Instituto Tecnológico de la Producción, Trujillo, Perú
  • Pierre Poldark Rodriguez Garate Instituto Tecnológico de la Producción, Trujillo, Perú https://orcid.org/0000-0002-2471-0491
  • Juan Carlos Mariños Legendre Instituto Tecnológico de la Producción, Trujillo, Perú
  • Bertha Beatriz Anhuaman Namoc Instituto Tecnológico de la Producción, Trujillo, Perú https://orcid.org/0000-0002-2620-2853
  • Maricielo Campos Gutiérrez Instituto Tecnológico de la Producción, Trujillo, Perú https://orcid.org/0000-0002-0854-2774
  • Miguel Elías Pinglo Bazán Instituto Tecnológico de la Producción, Trujillo, Perú https://orcid.org/0000-0001-7130-0156

DOI:

https://doi.org/10.54353/ritp.v3i1.e001

Keywords:

nanobubbles, oxidation, sulfide, chemical oxygen demand, fur, tannery

Abstract

The main problem that concerns companies dedicated to leather tanning and dressing is the environmental suitability of wastewater from the unhairing process. In line with this reality, the present developed system oxidized with an efficiency above 95% of sulfide ions to sulfates, likewise, it reduced by more than 85% the Chemical Oxygen Demand (COD) reflected in the organic load, to Through the use of a treatment system with catalytic nanobubbles, it allowed to comply with DS-003-2002-PRODUCE and DS-010-2019-VIVIENDA regulated by OEFA and SEDALIB, respectively. The methodology used consisted of a filtration equipment to remove suspended and sedimentable solids, then passed through a homogenization well to adjust the pH value, coagulation and flocculation system to finally reach the nanobubble reactor with drag system. With a sample of 1.5 m3/h, it was possible to reduce the evaluation parameters of the regulations, obtaining a concentration of Sulfur, COD, BOD5, Total Suspended Solids and oils and fats around 0.6 mg/L, 1491 mg/L, 1086 O2 mg/L, 58.50 mg/L and 7.62 respectively; all this under the validated catalytic nanobubble treatment system.

Downloads

Download data is not yet available.

References

Aguilar, G. (2016). Remoción de materia orgánica proveniente del proceso de pelambre utilizando micro - nano burbujas en la curtiembre San Pedro, Ate Vitarte, Lima, 2016. [Tesis de licenciatura, Universidad César Vallejo]. Repositorio de la Universidad César Vallejo. https://repositorio.ucv.edu.pe/handle/20.500.12692/71372.

Ahmed, K. et al (2018). Generación de nanoburbujas mediante filtros de membrana cerámica: la dependencia del tamaño de la burbuja y el potencial zeta del recubrimiento de la superficie, el tamaño de los poros y la presión del gas inyectado. Quimiosfera, Volumen 203, julio de 2018, páginas 327-335. https://www.sciencedirect.com/science/article/abs/pii/S0045653518305800

Ayala, R. & Ponte, P. (2019). Reducción de contaminantes orgánicos y biológicos de afluentes de la Planta de Tratamiento de Aguas Residuales Ancón utilizando micronanoburbujas de aire y grafeno. Lima, 2019. [Tesis de licenciatura, Universidad César Vallejo]. Repositorio de la Universidad César Vallejo. https://repositorio.ucv.edu.pe/handle/20.500.12692/46906.

Cegarra, D. (2011). Tratamiento físico-químico en efluentes de una tenería provenientes de un tratamiento biológico. [Tesis de maestría, Universidad del Zulia]. Academia. https://www.academia.edu/24082865/TRATAMIENTO_FISICO-QU%C3%8DMICO_EN_EFLUENTES_DE_UNA_TENER%C3%8DA_PROVENIENTES_DE_UN_TRATAMIENTO_BIOL%C3%93GICO

Decreto Supremo N° 010-2019-VIVIENDA que aprueba el Reglamento de Valores Máximos Admisibles (VMA) para las descargas de aguas residuales no domésticas en el sistema de alcantarillado sanitario. El peruano, de 11 de marzo de 2019, 17-31. https://busquedas.elperuano.pe/normaslegales/decreto-supremo-que-aprueba-el-reglamento-de-valores-maximos-decreto-supremo-n-010-2019-vivienda-1748339-3/

Decreto Supremo N° 003-2002-PRODUCE que aprueban Límites Máximos Permisibles y Valores Referenciales para las actividades industriales de cemento, cerveza, curtiembre y papel. El peruano, de 04 de octubre de 2002, 230921-230925. https://sinia.minam.gob.pe/normas/aprueban-limites-maximos-permisibles-valores-referenciales-las

Shahid, M. et al (2017). Coagulation Flocculation Based Biological Treatment of Tannery Industry Wastewater using Potash Alum and Drewfloc [Tratamiento biológico basado en coagulación y floculación de aguas residuales de la industria de curtidos utilizando potasio, aluminio y Drewfloc]. European Journal of Advances in Engineering and Technology, 2017,4 (1):71-75. http://ejaet.com/coagulation-flocculation-based-biological-treatment-of-tannery-industry-wastewater-using-potash-alum-and-drewfloc/.

Tatek, T. et al (2017). Micro and nanobubble technologies as a new horizon for water-treatment techniques: A review [Las tecnologías de micro y nanoburbujas como un nuevo horizonte para las técnicas de tratamiento de agua: una revisión]. Adv Colloid Interface Sci, 2017, 246:40-51. https://pubmed.ncbi.nlm.nih.gov/28683861/

Ulatowski, K. et al. (2019). Stability of nanobubbles generated in water using porous membrane system [Estabilidad de nanoburbujas generadas en agua mediante sistema de membranas porosas]. Chemical Engineering and Processing - Process Intensification, 2019, Volume 136, February 2019, Pages 62-71. https://www.sciencedirect.com/science/article/abs/pii/S0255270118308973

Ventura, S. (2017). Tratamiento de sanguaza de pescado del mercado de ancón utilizando micro - nanoburbujas de aire a escala laboratorio. [Tesis de licenciatura, Universidad César Vallejo]. Repositorio de la Universidad César Vallejo. https://repositorio.ucv.edu.pe/handle/20.500.12692/14093.

Published

2022-07-11 — Updated on 2022-08-06

How to Cite

Aguirre Guzman, F., Diego Perez, A. S. ., Rodriguez Garate, P. P., Mariños Legendre, J. C., Anhuaman Namoc, B. B., Campos Gutiérrez, M., & Pinglo Bazán, M. E. (2022). Catalytic nanobubble system for treatment of effluents in tanneries. INNOVATION AND PRODUCTIVE TRANSFERENCE JOURNAL, 3(1), e001. https://doi.org/10.54353/ritp.v3i1.e001

Most read articles by the same author(s)